Why does my BenQ Monitor have no picture?
If your BenQ Monitor displays no picture, please check the following: Ensure the display is turned on by checking the power indicator. Verify that the signal source device is also turned on. Check all cable connections to ensure they are firmly connected. Confirm that the computer, DVD, or Blu-ray disc player is set to a supported output resolution.
How to fix no sound on BenQ Monitor?
If there is no sound from your BenQ Monitor, make sure that the mute function is turned off on both the display and the input source device. Also, check that all cables are firmly connected.
What to do if the computer input image looks strange on BenQ Monitor?
If the computer input image on your BenQ Monitor looks strange, try these steps: First, make sure you've selected a supported output resolution on your computer. Next, use the Auto Tune function, found in the Picture menu, to automatically optimize the display. If Auto Tune doesn't fully resolve the issue, manually adjust the image using the Clock, Phase, Horizontal Position, and Vertical Position functions.
Why does the displayed image on my BenQ Monitor look blurry or grainy?
If the displayed image on your BenQ Monitor looks blurry or grainy, try using the Default function, located in the Setting menu, to match the output signal's image resolution to the display's native resolution. If the result is still unsatisfactory, use the EDID 1.4 or EDID 2.0 functions to manually adjust the resolution.
What to do if the BenQ Monitor remote control does not work?
If the remote control for your BenQ Monitor isn't working, try these steps: First, ensure the batteries are correctly oriented and not dead. Then, make sure you're within range and pointing the remote directly at the monitor's sensor, without any obstructions. Also, avoid strong fluorescent light or direct sunlight on the sensor. Finally, check for nearby devices emitting infrared signals that could cause interference and turn off their infrared function.
How to unlock the control panel buttons on a BenQ Monitor?
If the control panel buttons on your BenQ Monitor aren't working, it's possible they're locked. To unlock them, refer to the Keypad Lock function, located in the Setting menu, and try again.
General| Display Size | 55 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Touch Technology | Infrared |
| Contrast Ratio | 1200:1 |
| Viewing Angle | 178°/178° |
| Response Time | 8 ms |
| RAM | 2 GB |
| Storage | 16 GB |
| Panel Type | IPS |
| Processor | Quad-core |
| VESA Mount | 400 x 400 mm |
| Resolution | 3840 x 2160 |
| Brightness | 350 cd/m² |
| Operating System | Android |
| Speakers | 2 x 10W |
| Connectivity | HDMI, USB, LAN, RS232 |
| Power Consumption | 150W |
| Dimensions (W x H x D) | 89.9 mm |
| Multi-Touch | Yes, up to 20 points |
To Next Page
