BenQ SH960 - Setting a Preferred Color Temperature

31
Using the projector
English
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature and select User 1, User 2, or User 3 by
pressing / on the projector or remote control.
2. Press to highlight Color Temperature User_ Fine Tuning and press
ENTER. The Color Temperature User_ Fine Tuning page is displayed.
The menu name "User_" corresponds with the setting selected
in Color Temperature.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU/EXIT.
Selecting a Gamma setting
Highlight Gamma Selection and select a preferred setting by pressing /
on the projector or remote control.
Gamma refers to the relationship between input source and picture
brightness.
• Gamma 1/2/3
Select these values according to your preference.
• Gamma 4
Increases the average brightness of the picture. Best for a lit
environment, meeting room or family room.
• Gamma 5/6
Best for viewing movies in a darkened environment.
• Gamma 7/8
Best for viewing movies which are mostly composed of dark scenes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level
enhancements to enable higher brightness while providing truer, more
vibrant colors in picture. When set to "Off", Brilliant Color is disabled.
Color Temp User 1 Fine Tuning
Red Gain
EXIT Back
Green Gain
Blue Gain
Red Offset
Green Offset
Blue Offset
+50
+50
+50
+50
+50
+50
Black Level
Clarity Control
Color Temperature
Picture -- Advanced
S-Video
0 IRE
EXIT Back
T1
Color Temperature User_ Fine Tuning
Gamma Selection
3D Color Management
Brilliant Color
2
On
3D Comb Filter
Film Mode
On
On
High Brightness
Low Contrast
Low Brightness
High Contrast
1
2 3 4 5 6 7 8
Black Level
Clarity Control
Color Temperature
Picture -- Advanced
S-Video
0 IRE
EXIT Back
T1
Color Temperature User_ Fine Tuning
Gamma Selection
3D Color Management
Brilliant Color
2
On
3D Comb Filter
Film Mode
On
On