BenQ SH960 - Page 56

56
Additional information
English
1. After the start-up logo, press MENU/EXIT and then press / until
the Advanced Setup menu is highlighted.
2. Press to highlight Lamp Settings and press ENTER. The Lamp
Settings page is displayed.
3. Highlight Reset Lamp Timer 1/Reset Lamp Timer 2 and press ENTER.
A warning message is displayed asking if you want to reset the lamp
timer. Highlight Reset and press ENTER. The lamp time will be reset
to "0".
Lamp Settings
High Altitude Mode
Password
Reset All Settings
Advanced Setup
EXIT BackS-Video
ENTER
Off
Lamp Settings
Lamp Mode
ENTER
EXIT Back
Reset Lamp Timer 1
Reset Lamp Timer?
Reset Cancel
WARNING
Expert Mode
Baud Rate
115200
HDMI Settings
Audio Settings
Lan Control Settings
Signal Power On
Off
Direct Power On
Off
Equivalent Lamp Hour #1
50 hours
Equivalent Lamp Hour #2
50 hours
Reset Lamp Timer 2