BenQ SW240 User Manual

12 How to assemble your monitor hardware
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port
on the monitor. Connect the other end of the cable to
the HDMI port of a digital output device.
Or
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video
socket. Connect the other end of the cable to the
computer video socket.
After the monitor and the computer are powered on, if the
image is not displayed, disconnect the DP cable. Connect the
monitor to any video source other than DP first. Go to
System and DisplayPort on the OSD menu of the monitor
and change the setting from
1.2 to 1.1. Once the setting is
done, unplug the current video cable and re-connect the DP
cable. To go to the OSD menu, see Basic menu operation on
page 33.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
Or
3. Connect the audio cable.
You may connect headphones to the headphone jack
found on the back side of the monitor.
4. Connect USB devices.
To Connect the USB Type-B Cable
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back). This
upstream USB port transmits data between the PC and
the USB devices connected to the monitor.
TV OUT
PDI
F-OUT
S
D
IF-OUT

BenQ SW240 Specifications

General

3D	No
Pixel pitch	0.27 x 0.27 mm
Screen shape	Flat
Display diagonal	24.1 \
Display technology	LED
Native aspect ratio	16:10
Vertical scan range	50 - 76 Hz
Maximum refresh rate	76 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	20000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
On/off switch	Yes
TV tuner integrated	-
Certification	TUV GS, CE, ISO9241-307
Product color	Gray
Country of origin	China
Market positioning	Graphics design
HDCP version	2.2
USB hub version	3.2 Gen 1 (3.1 Gen 1)
Headphone connectivity	3.5 mm
Compatible memory cards	SD, SDHC, SDXC
USB Type-A downstream ports quantity	2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	90 - 264 V
AC input frequency	47/63 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.2 W
Power consumption (standby)	0.3 W
Power consumption (typical)	18.1 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 90 %
Cables included	AC, DVI, USB
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	230.71 mm
Width (with stand)	543.51 mm
Height (with stand)	428.5 mm
Weight (with stand)	6700 g
Width (without stand)	- mm
Weight (without stand)	- g