3
DAY AND DATE
On 4 options screen press 3 SYSTEM then press 1 SYSTEM TIME key in the correct time and press ENTER.
The screen will change to DATE. Key in date and press ENTER. Screen will display SET DAY OF WEEK
1=MON 7=SUN, press the correct number for the day of the week. Screen will change to 2 option screen, press
RUN twice to return to main display screen.
SWITCH OFF HEATER
To switch OFF the heater at any time during normal programmed operation press OVER/STANDBY button then
press 2 STANDBY MODE. If the heater is operating, the burner will shut down and the heater will go through
its shut down sequence and switch OFF.
To switch the heater ON press OVER/STANDBY button then press 2 STANDBY MODE the heater will switch
back to normal operation.
SYSTEM OVERRIDE
To switch the heater ON/OFF for a short period outside programmed operating times press OVER/STANDBY
button then press 1 OVERRIDE MODE. This will show 2 options, OVERRIDE 1 On 2 OFF.
If heater is OFF as it is outside its timed programme and you wish to run the heater for a short period press 1
and enter the number of hours you wish to operate in override mode (the default setting is 4 hours but this can
be changed through the engineers settings options).
When set, the display will flash periodically and count down the override time. The same operation can be done
by press 2 if the heater is ON and you wish to turn it off for a specific period.
Before returning to the normal operating period ensure that the override time entered in the overrun period is
deleted.
To Next Page
Loading...
Need help?
General