Programming further periods
You are now able to program period 2 Monday in just the
same way. Press Enter when complete.
Should you not require all three switching periods, simply leave the
times at HH:MM and this period will be ignored.
At this point press the Enter key to move onto Tuesday’s switching periods.
You are able to enter the switching periods for Tuesday
In just the same way.
Should the switching periods be the same on Tuesday, you can press the COPY button and this copies all of
the switching times from the previous day. So, for example, if you were to press the COPY button on Tuesday
period 1 all of the switching times from Monday would be copied, and then the Benson CP4 would move onto
Wednesday.
A screen is displayed to indicate the time have been copied.
To correct any mistakes made, use the DEL Key. If Enter is pressed at any time then
the current settings will be retained.
System
This section allows you to set the system time/date and the security codes for the system.
System Time
• From the Normal RUN mode press PROG and enter the user
security code.
• Press PROG and enter the user code
• Now press 3 for System
• Now press 1 for System time
• You are now prompted to enter the new time
(Enter this in 24 hour clock notation)
• When you have entered the new time, press the Enter key.
• You are now prompted to enter the System date.
(Date format is DD:MM:YY)
• When you have entered the new date, press the Enter key.
• You are now prompted to enter the day of week.
• When you have entered the new day, press Enter.
The control will revert back to the menu screen. Press RUN to return to the normal RUN mode.
System Code
• Press Prog and enter the security code.
• Pressing 3 for System
• Pressing 4 for Code prompts you to select the code you wish to alter.
7
MON PERIOD 2
S: HH:MM E:HH:MM
MON PERIOD 3
S: HH:MM E:HH:MM
TUE PERIOD : 1
S:HH:MM E:HH:MM
COPYING ALL DATA
MON to TUE
!
1> SYSTEM TIME
2>SYSTEM CODE
TIME NOW: 13.07
NEW TIME: HH:MM
DATE IS: 19-05-03
NEW DATE: DD:MM:YY
SET DAY OF WEEK
1==MON- 7==SUN
To Next Page
Loading...
Need help?
General