Need help?Do you have a question about the bentrup TC75 and is the answer not in the manual?
Explains the five segments (delay, heating, dwell, cooling) of the TC75 firing curve.
Details the storage and factory settings of up to six firing programmes.
Step-by-step guide to connect the TC75 to the internet using WPS or manual configuration.
Explains the five segments (delay, heating, dwell, cooling) of the TC75 firing curve.
Details the storage and factory settings of up to six firing programmes.
Step-by-step guide to connect the TC75 to the internet using WPS or manual configuration.
General| Type | Temperature Controller |
|---|---|
| Control Mode | PID, On/Off |
| Operating Temperature | 0°C to 50°C |
| Input | Thermocouple |
| Output | Relay, SSR |
| Resolution | 0.1°C or 1°C |
| Display | LED |
| Power Supply | 100-240V AC |
| Storage Temperature | -20°C to 60°C |
| Dimensions | 48 x 48 mm |
| Measurement Range | Depending on thermocouple type (e.g., K: -200 to +1372 °C) |
To Next Page