BeoCord VX 7000 - ON-SCREEN STATUS DISPLAYS

ON-SCREEN STATUS DISPLAYS
28
As soon as the BeoCord VX 7000 starts
carrying out your instruction, a small
status display appears at the bottom of
the TV screen.
The status display shows what the video
tape recorder is doing...
The video tape is playing – you are watching
track number 3 on the tape.
The video tape is playing – you have selected the
mono (linear) sound track.
The video tape is playing – 1 hour and 50 minutes
playing time is left on the tape.
The video tape has been playing for 2 hours and
50 minutes.
You have pressed LIST to display COUNTER then
GO and are going to key in a specific position you
want the video tape recorder to find.
You have pressed the yellow button to cue
forward through the tape.
You have pressed the green button to cue
backwards through the tape.
You have pressed STOP to stop the video tape
recorder with a still picture on the screen.
You have pressed the blue button to cue forward
in slow motion through the tape.
You have pressed the red button to cue
backwards in slow motion through the tape.
Note: For information about how to change the
BeoCord VX 7000 counter indication, see pages
10-11.
V.Tape Play 3
V.Tape Play 1:50
V.Tape Play 2:50
V.Tape Cue > 3
V.Tape Cue < 3
V.Tape Still 3
V.Tape Slow > 3
V.Tape Slow < 3
V.Tape Go to - : - -
Mono
V.Tape Play 3