Personal Portable DAB Radio H300 Instructions for Use
Please read and retain these instructions for future reference v001: 21/10/20
Charging your DAB Radio
1. Connect the micro-USB cable to the micro-USB port.
2. Connect the other end of the micro-USB cable to a power outlet, using a USB power adapter (not supplied).
You can also charge the battery by connecting the DAB Radio to a computer's USB port.
Switching on for the first time
Before you switch on the first time, charge the battery for at least 8 hours.
1. Connect the headphones into the headphone socket .The headphones are also the aerial.
2. Slide the Power/Lock switch into the ON position, then release the switch.
DAB switches on and starts tuning to digital radio stations. After the auto tune is complete, you can start
listening to digital radio.
Locking and unlocking DAB
You can lock the buttons, so you do not accidentally press a button.
When the radio is switched off, lock the buttons so you do not accidentally switch it on.
1. To lock the buttons, slide the Power/Lock switch into the LOCK position.
2. To unlock the buttons, slide the Power/Lock switch into the middle position.
To Next Page
Loading...