BERMAD BIC 2 - Page 13

13
M Tu W Th F Sa Su
OFF
3
START
1
1
2
M Tu W Th F Sa Su
:00
3
START
AM
6
1
2
Setting the Irrigation Start Time
To each valve can be assigned with up to five
different start times per irrigation day.
For setting start time for the first daily cycle at
the selected day (START 1) press the
 button
for setting the required start time. The value (2)
starts flashing.
Remark: The value OFF indicates that no start time is set.
1. Use the
 and  buttons to set the required
start hour (2).
Remark - To cancel an irrigation start time
press the
 button when the hour digits are
flashing until you pass the midnight digits.
2. Use the
 button to move to the minutes setting.
3. Use the
 and  buttons to set the required minute.
4. Press the
 button to end the process.
For setting additional start times for this day:
5. Use the
 and  buttons to select the second start time (START 2).
6. Repeat steps 1-5 for setting the required start time.
7. Repeat these steps for each one of the start times you need to set.
8. Press the
 button to move to the next stage “setting the irrigation
duration”.