11
BERNAFON CHRONOS
Wax Buster (WB)
1. Locate the microphone opening on the face plate.
2. With the dome side facing up, grasp the wind screen with a pair of tweezers and snap it into
the hole.
3. To remove, carefully insert the service tool into the wind screen and pop it out.
1. Insert the tool into the old lter and twist.
2. Remove the lter from the instrument.
3. Take a new lter from the box.
4. Place the lter in the instrument with the gray
side up.
5. Use the tool to tighten the lter.
6. To clean, push down and move the lter back
and forth on a clean cloth.
Wind Screen for Chronos ITC instruments
• • • •• • • • •• • • • •• • • • •• • • • • • • • • • •••••••••••••••••••••••••••••••
• • • • •••• •• • • • • •• • •
• • • ••••• • •• • • • • •• •
• • • •• • • • •• • • • •• • • • •• • • • • • • • • • •••••••••••••••••••••••••••••••
• • • • •••• •• • • • • •• • •
• • • ••••• • •• • • • • •• •
To Next Page
Loading...
Need help?
General
