10
Chronos custom models may be supplied with one of several types of wax protection. The following
shows the insertion and removal procedure for the most common types.
Chronos ITE
Wax Protection
NoWax
Micro Wax Buster (MWB)
1.
2.
3.
4.
1. Remove a tool from the turtle.
2. Insert the empty end of the tool into the old
lter and pull it out.
3. Push a new lter into instrument.
4. Discard the used tool.
2.
1.
3.
4.
5.
1. Use the tool to pull out the old lter.
2. Take a new lter from the box.
3. Place the gray side of lter on the small end of
the tool as shown.
4. Push the lter into the instrument.
5. To clean, push down and move the lter back
and forth on a clean cloth.
To Next Page
Loading...
Need help?
General
