44
Using the
telephone coil
The SoundGate 3 has a built-in induction loop
receiver, which can be used to pick up audio
information from auditoriums, churches or public
buildings which have an installed audio loop.
If you are unsure if a location has an audio loop
installed, look for the universal symbol below.
To activate and begin listening via an
installed audio loop, press and hold the
SoundGate 3 auxiliary input key for
2 – 3 seconds.
To end listening through the
looped source and resume the
previous listening program or
streaming state, give another
2 – 3 second press to the
auxiliary input key.
SN2_ILLU_AuxKeyPress_HI
31
To Next Page
Loading...
