Bernette Straight Stitch B08 - Page 40

TROUBLESHOOTING
40
2024-06 EN 5020105.00A.04
Fault Possible cause Troubleshooting
The Machine doesn't Start
The machine is switched off. > Switch the machine on. (see page14)
The machine is not connected to
the power supply.
> Connect the machine or plug in the power cable. (see
page14)
The machine is defective. > Contact the specialized bernette dealer.
Unfavorable room temperature. > Place the machine in a warm room one hour before
use.
> Connect the machine and switch it on.
The presser foot is raised. > Lower the presser foot. (see page18)
Foot control is not connected. > Connect the foot control. (see page14)