The needle threader automatically turns to
the threading position and the hook pin
passes through the needle eye.
Pull the thread to the right, guiding it to the
front of the needle
Hold the thread loosely and release the lever
slowly.
The hook will turn and pass the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.
Raise the needle to its highest position
and lower the presser foot.
Lower the needle threader lever slowly and
draw the thread through the thread guide as
illustrated and then to the right.
Attention:
Turn power switch to the off position ("O").
Needle Threader
Machine Setup
16
To Next Page
Loading...
