The presser foot lever raises and lowers
your presser foot.
When sewing several layers of thick fabric,
the presser foot can be raised to a second
stage by pushing the presser foot lever
further up. This allows for easy positioning
of the work.
With the sewing table detached, the drop
feed lever can be located on the back of the
free arm.
To Raise or Drop the Feed Dogs
Sliding the lever to the " " (b) will lower
the feed dog, for example during button
sewing or freehand embroidery.
If you wish to continue sewing normally, slide
the lever to the " " (a) in order to raise
the feed dogs.
The feed dog if you do not
turn the handwheel, even if the lever is slid
to the right. Make a complete turn to raise
the feed dogs.
will not rise up
Two-Step Presser Foot
Machine Setup
20
To Next Page
Loading...
