Using the overcasting foot
Change the presser foot to the all purpose
foot (T).
Sewing the overcasting along the edge of
the fabric so that the needle drops over the
edge of the fabric on the right side.
Using the all purpose foot
Change the presser foot to the overcasting
foot (E).
Sew the fabric with the fabric edge against
the guide of the overcasting foot.
The overcasting foot should be used to sew
with patterns and 21 only and do
not set the stitch width narrower than "3.5".
It is possible that needle could hit the
presser foot and break when sewing other
patterns and width.
Attention:
06, 08,12
Overcasting Stitches
Basic Sewing Procedures
3.5~7.0
2.0~3.0
2.5~4.5
2.0~3.0
39
To Next Page
Loading...
