Twin Needle Sewing - model 25
T
2.0~5.0
Insert the twin needle.
Attention:
When using twin needles, use the all
purpose foot.
Use only twin needle assemblies with max.
2mm needle distance (i.e. bernette part
number 502020.62.91)
Follow the instructions for single-needle
threading using the horizontal spool pin.
Thread through the left needle.
Set the spool pin (included with the
accessories) into the hole on the top of the
machine.
Thread through , making
certain to omit the thread guide above the
needle and pass thread through the right
needle.
the same path
Thread each needle separately.
Make sure that the two threads used to
thread the twin needle are of the same weight.
You can use one or two colors.
Please make note:
Please Note:
Twin needles must be purchased separately.
They are not include with this machine.
Select the pattern.
Press the function button to open the
function program.
Please Note:
- Pattern 10, 50-60 and alphabets cannot be
used for twin needle sewing.
Special Functions
63
To Next Page
Loading...
