EN
www.universal.bertazzoni.com www.universal.bertazzoni.com
11
4.2 Overlay panels mounting brackets
layout
90 SERIES 75 SERIES
A 897 (35 1/4”) 747 (29 3/8”)
B 417 (16 3/8”) 342 (13 1/2”)
C 354,5 (14”) 279,5 (11”)
B B
A
B B
C C
13 (
½”)
34 (1
)
6,5 (
¼”) 6,5 (¼”)
34 (1
)
1163 (45
¾”)
660 (26”)
157 (6
¼”
)
min 1320 (52
”)max 635 (25”)
507.5 (20”)
382 (15
)
100 (4”)
Français
4.3 Panels dimensions
Panels can have thickness ranging between 18 mm
(3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51
lbs) and drawer panels may be a maximum weight
of 11kg (25 lbs). Exceeding these weights could void
your warranty for any service issues which can be
attributed to overweight panels.
The hinging mechanism on appliances is considered
to be `Zero-clearance`. The door and drawer widths
specified below assume the minimum niche width
is being used and a 3.5mm (1/8”) reveal is desired
around the panels. Adjust your panel dimensions
accordingly to your own design criteria considering
your niche width and your reveal. Minimum reveal/
gap should not be less than 1.5mm (1/16”).
Note
All lateral bracket placement measure-
ments go from the center line to the outside
bracket hole.
Vertical adjustment bracket for upper door.
Note orientation.
Vertical adjustment bracket for lower
drawer. Note orientation.
B B
A
B B
C C
13 (
½”)
34 (1
)
6,5 (
¼”) 6,5 (¼”)
34 (1
)
1163 (45
¾”)
660 (26”)
157 (6
¼”
)
min 1320 (52
”)max 635 (25”)
507.5 (20”)
382 (15
)
100 (4”)
Français
B B
A
B B
C C
13 (
½”)
34 (1
)
6,5 (
¼”) 6,5 (¼”)
34 (1
)
1163 (45
¾”)
660 (26”)
157 (6
¼”
)
min 1320 (52
”)max 635 (25”)
507.5 (20”)
382 (15
)
100 (4”)
Français
B B
A
B B
C C
13 (½”)
34 (1
)
6,5 (
¼”) 6,5 (¼”)
34 (1
)
1163 (45
¾”)
660 (26”)
157 (6
¼”
)
min 1320 (52
”)max 635 (25”)
507.5 (20”)
382 (15
)
100 (4”)
Holes positions
Door
panel
Back of the panel
Back of the panel
Drawer
panel
SERIES DOOR/DRAWER WIDTH NICHE WIDTH
90 897 (35 1/4”) 900 (35 1/2”)
75 747 (29 3/8”) 750 (29 5/8”)
To Next Page
Loading...
