34
3. INSTALLATION INSTRUCTIONS
REMOVING THE OVERLAY PANEL MECHANISM
COVERS
• Remove the upper screws to remove the upper
cover.
REF18FCBIPRV / REF18FCBIPLV
REF24FCBIPNV
REF24RCBPNV
REF30RCBPNV
WARNING:
There is a magnet on the cover door hanger
bracket. This is a functional component for
product operation, because it activates the
door open reed switch. Please ensure the
covers do not get switched; put each back
on the same bracket it was removed from.
The magnet should not be switched with
the lower cover.
• Remove the two screws to remove the door
hanger bracket for the lower mechanism cover.
To Next Page
Loading...
