43
EN
3.6 Hinge Adjustment and Reversing
the Door Swing
ADJUSTING THE SPRING TENSION OF THE HINGES
• Use a drill to adjust the tension of the upper and
lower hinges of the fridge door. Set the hinge
adjustment screw to position "I" from position
"O".
WARNING:
The door must be fully open during this
adjustment.
WARNING:
The hinge tension adjustment must be
performed only after the door panel has
been adjusted.
REMOVING THE DOOR PANEL
• Set the tension level of the hinge to "0".
CAUTION:
Failure to set the hinge to "0" before
continuing the installation may result in
injury.
• Remove the side closing seals.
To Next Page
Loading...
