10
1
2
1
2
Series: All
Adjust the appliance level by means of the front levelling feet
and the rear adjustable wheels.
Operate as follows:
The grille should ship taped to the back of the appliance. If by chance
it is already in place, remove the grille (it is kept in position by magnets),
adjust the height of the levelling feet
1
by means of a 17
mm (3/4”) wrench.
Then adjust the height of the rear wheels by turning the front adjusting
bolts
2
clockwise or counter-clockwise as it may be required. (Do
not use power drivers with high torque settings for this step as it could
damage the levelling mechanism)
Mount the lower ventilation grille only after the unit is nally levelled
in the niche.
Levelling
To Next Page
Loading...
