Bertolini C300 Series - 2 Product Description

5
22- PRODUCT DESCRIPTION
Bertolini high-pressure piston pumps are designed to be used with clean water, with a tem-
perature of up 60°C.
If you pump corrosive additives with higher temperature please consult the “Bertolini Tech-
nical Service”.
The pump operation must comply with the specifications indicated on the label (fig. 1); re-
moving label implies the loss of any warranty.
Upon receipt of the pump, check the label is similar to the one illustrated below.
The following data are indicated on the label:
1. Max. admissible pressure (bar)
2. Max. admissible pressure (P.S.I.)
3. Pump model
4. Flow rate (l/min)
5. Flow rate (G.P.M.)
6. Serial number
7. Required power (KW)
8. Speed
The Max. admissible pressure and the Max. speed indicated on the label cannot be
exceeded.
If the identification label is damaged by use, please contact the seller or an author-
ized Customer Service for its replacement.
4
1
2
7
5
8
6
3