BESCUTTER Accu Star - Page 38

34 / 49
Weekly
Check cutting head and
ceramic body
Yearly
Check and replace filter
element of refrigeration
dryer
Check water level and quality
in water chiller
Check filter element of the
machine
Clean filter screen in air
compressor
Replace deionized water in
the laser
Check deionized water level
Replace air compressor oil
filter
Monthly
Check workbench chains
Every 4,000 hours
Check the workbench
Click Oil Level
Lubricate guide rail of the
machine
Replace air compressor oil
Add the lubricant
Replace oil-water separator
of air compressor
7.8 Maintenance of the laser
1. Regular maintenance of the laser can effectively reduce failures, and keep the equipment
in a good operating state at any time.
2. Usually, the laser does not need much maintenance. All functions and parameters are
monitored by the control system at any time. If there is any abnormality or expiration of
one maintenance item, the system will automatically send alarm information. Take
corresponding measures or contact with us for maintenance in such a situation.
3. Regularly check equipment conditions, and please timely conduct maintenance if any sign
of abnormality or pollution.
4. Regularly check laser cable conditions to protect the external protection layer from damage.
Damaged protection layer of cable (if any) can only be replaced.