EasyManua.ls Logo

BESCUTTER Accu Star - Page 9

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 / 49
Tips
Please pay attention to warning tips!
Please follow the instructions and prohibitions indicated by warning tips. They protect your
safety.
These warning tips include: a symbol, a warning, tips about danger sources and danger types, and
illustration on avoiding danger.
The symbol in the left column, indicating the danger type, is the complement of warning tips.
Sign
Meaning
High voltage sign
Electric shock danger: operating electrified parts, or handling electrical
equipment inappropriately or not carefully, can cause dangerous burns and
electric shocks. Electrical equipment or devices must be operated by
maintenance personnel alone or under their supervision. Unless otherwise
specified, electrical parts must be disconnected from the power supply during
maintenance, and measures shall be taken to prevent it from being turned on
again without authorization. Check that if the disconnected part is electrified.
Insulate the electrified parts nearby.
Laser danger
Laser radiation danger: undefined invisible laser radiation may be emitted due
to the damage of shell safety cover or the working optical fiber, and the part of
the cutting head, modified or missing. Direct laser beams, laser-bounce or stray
radiation can be harmful to the eyes and skin. Burns, eye injuries and skin
injuries. Do not remove or modify the safety cover of the machine. Only the
maintenance tasks specified in the instructions can be performed. Any
maintenance or repair works beyond specified requirements for the parts
mentioned above can only be performed by the manufacturer's personnel. After
maintenance and repair, all dis-assembled safety covers must be re-installed
properly. Do not disconnect the working optical fiber from the laser module or
the cutting head. Replacement or re-installation of the working optical fiber can
only be performed by the manufacturer's personnel.
Prohibition of trampling
This symbol warns danger and the machine part cannot bear a human body.
Otherwise, it may result in personnel injury or machine damage.
Beware of mechanical
hand-pinch
This symbol warns mechanical hand-pinch danger.