EasyManua.ls Logo

Bestop Bikini - Installation Steps - Rear and Sides; Secure Rear Corners and Buckle Straps; Secure Hook and Loop Strips

Bestop Bikini
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Header Bikini
®
, Safari Version – Installation Instructions
Rev. C 0507 52581 pg. 3
Locate the buckle straps sewn to the rear corners
of the Bikini. Wrap the straps around the sport bars,
thread the ends of the straps through the buckles
and pull them tight.
Secure Rear Corners
Locate the two (2) buckle straps sewn to the rear
of the Bikini. Wrap the straps around the rear sport
bar, thread the ends of the straps through the
buckles and pull them tight.
Vehicles with Side Door Rails skip to Step 8.
Locate the hook and loop strips sewn to the Bikini
on each side of the door pillar. Wrap them around
the door pillar and fasten them to each other.
Vehicles with Side Door Rails skip to Step 8.
Locate the hook and loop strips sewn to the front aps and the three (3) pairs of hook and loop strips sewn
along the side of the Bikini. Wrap them around the horizontal sport bar and fasten them to each other.
Secure Hook and Loop Strips –
Vehicles without Side Door Rails
Wrap Strap
around Sport Bar
Secure Rear Buckle Straps
Rear
Rear Sport Bar
Inside of Bikini
Wrap Straps
around Sport Bar
Secure Hook and Loop Strips –
Vehicles without Side Door Rails
Wrap Hook and Loop around
Sport Bar and Fasten Together
Wrap Hook and Loop around
Sport Bar and Fasten Together
View from Inside Vehicle
Sport Bar
Sport Bar
Door Pillar
Wrap Hook and Loop
Strips around Pillar
and Fasten to Each
Other
Rear
Rear Loop
Strip
Front Hook
Strip
Front Loop Strip
(Not used with
Door Rails –
Tuck out of sight)

Related product manuals