Bestop Bikini - Installation Steps - Vehicles with Side Door Rails; Secure Plastic Strips; Secure Rear Flaps; Secure Front Flaps

Header Bikini
®
, Safari Version – Installation Instructions
Rev. C 0507 52581 pg. 4
Vehicles without Side Door Rails skip the remaining steps.
Fold the front fl ap from back to front, so that it lays fl at on top of the horizontal bar and wrap the loop strip
around the Door Rail. Fasten it to the hook strip slipped under the Bikini in the last step.
Vehicles without Side Door Rails skip the
remaining steps.
Locate the hook and loop strips sewn to the front
and rear fl aps of the Bikini. Tuck the hook strips
between the Bikini and the horizontal sport bar to
be secured later. Then locate the plastic strip above
the door opening and tuck the hook and loop strips
sewn here inside of the Bikini. Slip the plastic strip
into the channel in the Door Rail. Repeat this with
the rear plastic strip. Finally insert the small plastic
strip between the larger ones into the channel in
the Door Rail above the door pillar.
Secure Plastic Strips – Vehicles
with Side Door Rails
Secure Front Flaps – Vehicles
with Side Door Rails
Vehicles without Side Door Rails skip the
this step.
Fold the rear fl ap from front to back, so that it lays
fl at on top of the horizontal bar and wrap the loop
strip around the Door Rail. Fasten it to the hook strip
slipped under the Bikini in Step 8.
Secure Rear Flaps – Vehicles
with Side Door Rails
Tuck Hook and Loop
Strips under Bikini
Slip Plastic Strips into
Channel on Door Rails
Front
Driver’s Door Opening
Fold Fabric Insert
from Back to Front
Hook and Loop Strips - Wrap
around Horizontal Sport Bar
and Fasten to each other
Fold Fabric Insert
from Front to Back
Hook and Loop Strips -
Wrap around Hori-
zontal Sport Bar and
Fasten to each other
Driver’s Door
Opening
Rear Loop Strip (Not
used with Door Rails
– Tuck out of sight)