Beta 1760/A - AC CURRENT MEASUREMENT

EN
12
3.2.4 AC Current
> Overload Protection: 2mA to 200mA Ranges: F1:F 200mA/250V fuse
10A Range: F2:F10A/250V fuse
> Max. Input Current: mA Jack: 200mA
10A Jack: 10A
> Voltage Drop: 200mV (full range)
> Frequency Range: 40 to 400Hz
> Test on 60Hz/50Hz
> Response: Average, calibrated in rms of sine wave
Range Resolution Accuracy
2mA 1µA ±(1.2% of rdg +5 digits)
200mA 100µA ±(2.0% of rdg +5 digits)
10A 10mA ±(3.0% of rdg +10 digits)
MultimetroDigitale.book Page 12 Friday, September 26, 2003 6:34 PM