3
CHECKS AND MAINTENANCE
57
GB
CLEANING AND CHECKING THE VEHICLE
Use water jet to soften the dirt and mud accumulated on the paintwork, then remove
them with a soft bodywork sponge soaked in water and shampoo (2-4 percent
shampoo in water). Subsequently rinse well with water, and dry with air and cloth
or suede leather. For the outside of the engine use a brush soaked in petroleum and
clean rags. Petroleum damages the paintwork. Always wash the vehicle before
waxing it with silicon waxes.
Important:
When cleaning using a high-pressure water jet cleaner, avoid aiming the jet to the
digital instrument panel.
Detergents pollute water. Always wash the vehicle in areas equipped for col-
lection and purifi cation of the washing liquids.
Never wash the vehicle in the sun, particularly during the summer when the
bodywork is hot. The shampoo would dry before being rinsed off and cause
damage to the paintwork. Do not clean the plastic surfaces with cloths soaked
in petrol or naphtha as they would lose their shine and mechanical properties.
CHECKS AFTER CLEANING
After cleaning the motorcycle, it is advisable to:
• Clean the air fi lter (refer to the procedure described on page 49).
• Empty the fuel container by loosening the fuel emptying screw in order (as described
on page 54) to check for the presence of water.
• Add grease to the chain.
To Next Page
Loading...
Need help?
General
