BETAFPV LiteRadio 3 User Manual

07
9.BETAFPV Congurator
BETAFPV Congurator is utility designed to simplify updating, conguring and
tuning the radio transmitter.
Download address: https://github.com/BETAFPV/BETAFPV_Congurator/releases
Remove the cover on the back of the transmitter and there is a label, comes with "BETAFPV
Congurator Suppoed".
How to recognise if your radio transmitter suppos the BETAFPV Congurator?
DO NOT power on the transmitter rst and connect it to the PC. The USB po is invalid in this
situation.
How to enter the radio transmitter conguration page:
● Turn o the radio transmitter.
● Click the "Connect Radio Controller" button on the top right of the page.
● Open the BETAFPV Congurator program in your computer and switch to the
congurator page for radio transmitter.
● Connect the transmitter to computer via USB data cable. Wait for the LED ring
breathes in red or green.
joysticks(counterclockwise/clockwise), then press SETUP button again, it hears a
long ''Bee''sound about 3 seconds. And the red LED light stops ashing, indicating
that joystick calibration is complete successfully.

BETAFPV LiteRadio 3 Specifications

General

Frequency Range	2.4GHz
Screen	No
Voice Support	No
Support USB Simulator	Yes
Firmware Upgrade Method	Via USB
RF Power	100mW
Display	No
Protocol	Frsky
Compatibility	Frsky, Futaba
Gimbal Type	Hall sensor gimbals
USB Port	USB Type-C
Channels	8 Channels
Battery	Built-in 2000mAh 1S Battery