XX58：
0 ≤ m ≤ 3；48 ≤ m ≤ 51
1 ≤ xL + xH×256 ≤ 48
0 ≤ yL ≤255，0 ≤ yH ≤255
0 ≤ d ≤ 255
k = (Hl + Hh×256)×(yL + yH×256)
XX80：
0 ≤ m ≤ 3；48 ≤ m ≤ 51
1≤ xL + xH×256 ≤ 72
0 ≤ yL ≤ 255，0 ≤ yH ≤ 255
0 ≤ d ≤ 255
k = (Hl + Hh×256)×(yL + yH×256)
In standard mode, this command is effective only when there is no data in the print
buffer.
This command is not affected by print modes (character size, emphasized,
double-strike, upside-down, underline, white/black reverse printing, etc.) for raster
bit image.
Data outside the printing area is read in and discarded on a dot-by-dot basis.
The position at which subsequent characters are to be printed for raster bit image is
specified by HT (Horizontal Tab), ESC $ (Set absolute print position), and GS L
(Set left margin). If the position at which subsequent characters are to be printed is a
multiple of 8.
The ESC a (Select justification) setting is also effective on raster bit images.
d indicates the bit-image data. Setting a bit to 1 print a dot and setting it to 0 does not
print a dot.
When xL+xH×256=64
To Next Page
Loading...
