6
7. USE WITH APP
Downloading the App
The scale has 30 memory spaces for 8 dierent scale users, enabling you to save the various members
of your family, for example. You can use the “beurer HealthManager Pro” app to conveniently set up the
individual app users and their corresponding scale user via your smartphone. To do so, proceed as follows:
• Download the free “ beurer HealthManager Pro” app from the Apple App Store or Google Play.
Click here for the
“ beurer HealthManager Pro”
app
List of system
requirements and
compatible devices
• Activate Bluetooth
®
in your smartphone’s settings.
• Start the app.
• Select BF 500 in the app and follow the instructions.
User data Set values
Initials/abbreviation of name Max. 3 letters or numbers
Height 3 ft 3.5 in to 7 ft 2.5 in (100 to 220 cm)
Age 10 to 100 years
Gender Male (
), female ( )
Activity level 1 to 5
To select the proper Activity Level, consult the table below.
Activity level Physical activity
1 None.
2
Low: little and light physical exertion (e.g. going for walks, light gardening, simple
gymnastics).
3 Medium: physical exertion, at least 2 to 4 times a week for 30 minutes each.
4 High: physical exertion, at least 4 to 6 times a week for 30 minutes each.
5
Very high: intensive physical exertion, intensive training or hard physical work for at
least 1 hour every day.
Note on multi-user usage:
Create a separate app user for each scale user (in the same or on another smartphone/tablet with “beurer
HealthManager Pro” app).
If the same scale is used by several app users, the device must be added in the app for each of them during
setup. A new user is automatically created on the scale (e.g. U:2).
8. USE WITHOUT APP
Alternatively, you can create a scale user directly on the scale without using the app. Do not create a scale
user directly on the scale if you have already created that scale user using the app. This process is not
required if the scale has already been connected to the app.
1.
After inserting the batteries, press the SET button.
2. “Unit” appears in display , select with
/ button and confirm with SET button.
NOTE: The scale is initially set to weigh and measure in “lb” and “in”.
3. “USEr” appears in display. Use the
button to select the scale user you need (you can select from U: 1
to 8). Confirm the selection with SET button.
4.
(
) flashes on the display. Use the button to set the gender. Confirm your entry with the SET button 3 .
5. “5,7” flashes on the display. Use the button to set the height. Confirm your entry with the SET button.
To Next Page
