12 Beurer GL44 mmol/L
3.4 Test strips
Front Rear
3
2
1
1 Gap for blood input
2 Handle
3 Contacts
You can identify the rear by the contact tracks.
Insert the test strip into the device so
that the contacts are pointing inside
the slot.
Please ensure that the front of the test
strip is facing you.
Note
Carefully read the following information on handling and storing your test strips. Please observe all
notes to ensure that the test strips supply accurate measured results.
Warning
Use each test strip only once and for one patient only!
Handling test strips
Note
•
Immediately securely close the test strip box after taking out a test strip.
•
Do not use the test strips if they have expired. The use of expired test strips may lead to incorrect
measurements. The expiry date is printed on the box next to the hourglass symbol
.
•
Test strips expire three months after the box is opened. Make a note of the expiry date (opening date
+ 3 months ) on the label. The shelf life is limited to the expiry date (see date next to the hourglass
symbol
).
To Next Page
Loading...
