EasyManua.ls Logo

Beurer MP 70 - Page 15

Beurer MP 70
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Under no circumstances should you open or repair the device your-
self, as correct functioning of the device can no longer be guaranteed
should you do so. Failure to observe this will invalidate the warranty.
The device is intended solely for the purpose described in these instructions for use. The
manufacturer is not liable for damage resulting from improper or careless use. This device
is not suitable for commercial use or for use in the medical domain. Only use the device in
the private domain.
Do not use the device if you have heart disease, flushed skin, inflammations, swelling,
sensitive areas, diabetes, open wounds, burns, eczema, psoriasis or reduced sensitivity to
pain.
Do not use the device if you are not sensitive to heat.
If you are pregnant or suer from health problems, please consult your doctor before using
the device.
If you suer from acute inflammations or a peripheral vascular disease, please consult your
doctor before using the device.
Never operate the paran bath without paran wax.
Remove jewellery from your hands and feet before use.
Never heat the paran wax in its plastic packaging. Never heat the paran wax on the hob,
over a naked flame or in a microwave. Only heat the paran wax in the paran bath.
Children do not recognise the danger posed by electrical devices. Make sure that the de-
vice cannot be used by children without supervision.
Check that the device and the mains cable are in perfect working order before each usage.
In the event of damage, the device must not be used.
Before connecting the device to the mains, check whether the local mains voltage corres-
ponds to the voltage specified on the device.
Do not use the device near water (e.g. bath, wash basin etc.).
Do not use the device while bathing, showering or sleeping.
Never place the device in water or other liquids. Store the device in a safe place.
Never place the device on easily damaged surfaces.
When using the device, ensure that it is placed on a stable and level surface.
Keep the device and mains cable away from hot surfaces. Do not place it on top of other
devices, as the hot paran wax may cause damage.
Do not use the device in the vicinity of aerosol products or equipment that emits oxygen.
Do not use the device outside. The device is only to be used inside.
Before use, ensure that the mains cable does not pose a trip hazard.
Do not use the device in bed, whilst sleeping or if you are tired.
Never use the device under a blanket or towel etc.
Only use the device with the supplied accessories.
Do not overfill the paran bath. Ensure that the liquid paran wax does not exceed the
MAX fill indicator line.
If the paran wax has completely melted, the device may be very hot.
Before submerging your hands, feet or elbows in the liquid paran wax, use the inside of
your wrist to check that the temperature of the wax is comfortable.
Should a fault occur during use, switch o the device immediately and remove the mains
plug from the socket.
Keep the hot paran wax away from your eyes and other body parts that are sensitive to
heat.

Related product manuals