Beurer MP 70 - Included in Delivery; Device Description

17
Separate the packaging elements and dispose of them in accordance with local
regulations.
B
A
Marking to identify the packaging material.
A = Material code, B = Material number:
1-7 = Plastics, 20-22 = Paper and cardboard
The products demonstrably meet the requirements of the Technical Regula-
tions of the EAEU
United Kingdom Conformity Assessed Mark
Protection class II device
The device is double-insulated and is, therefore, in protection class 2
For indoor use only
Separate the product and packaging elements and dispose of them in accordance
with local regulations.
Importer symbol
3. INCLUDED IN DELIVERY
Check that the device packaging has not been tampered with and make sure that all contents
are present. Before use, ensure that there is no visible damage to the device or accessories and
that all packaging material has been removed. If you have any doubts, do not use the device and
contact your retailer or the specified Customer Services address.
1 x MP 70 paran bath
1 x lid
1 x protective grille
2 x 450g bags of paran wax
30 x plastic sleevers
4. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
1
Paran bath
5
Red heating light
2
Lid
6
Protective grille
3
Green operation light
7
Paran wax
4
Temperature controller
8
Plastic sleevers