Beyerdynamic Blue BYRD 2nd generation - Operation; Powering On and Off; Bluetooth Pairing

Operation
Blue BYRD (2
nd
generation) 13/18
OPERATION
Switching on and o
Switching on:
► Press the On/O button for 2 s.
Switching o:
► Press the On/O button for 4 s.
Pairing with a player
Before you can use the in-ear headphones for the fir time, you mu pair
them with your mobile phone or another Bluetooth®-enabled device. The
pairing procedure may dier depending on the player.
► Please refer to the corresponding player operating inructions.
Eablishing pairing:
9 The in-ear headphones are switched o.
1. Press the On/O button for 4 s.
The Bluetooth® pairing mode stas.
The LED display flashes alternately blue and red.
2. Activate the Bluetooth® function on the player and search for new
devices if necessary.
3. In the Bluetooth® menu of the player, select “Blue Byrd (2nd gen.)” from the
available devices and pair the two devices with each other.
Aer a successful connection, the LED flashes blue briefly every 7 s. Each
time the unit is switched on again, the units will connect as soon as they
are within range of each other.
If the Bluetooth® connection has been lo, the LED briefly flashes blue
every 3 s.
EN