Beyerdynamic Blue BYRD 2nd generation - Safety Instructions; Intended Use; Volume Adjustment Safety

Contents
Blue BYRD (2
nd
generation) 7/18
Thank you for choosing Blue BYRD in-ear headphones.
SAFETY INSTRUCTIONS
► Please read these inructions carefully and completely before using
the product.
► Please observe all inructions given, especially those concerning the
safe use of the product.
► Please also observe the detailed operating inructions for this product.
The inructions can be downloaded from the beyerdynamic website at
www.beyerdynamic.de.
► Do not use the product if it is defective.
Intended use
Only use the product as described in this product manual. beyerdynamic
accepts no liability for damage to the product or injury to persons caused
by careless, improper or incorrect use of the product, or by use for purposes
not specified by the manufacturer.
beyerdynamic is not liable for damage to USB devices that do not comply
with the USB specifications.
beyerdynamic is not liable for damage resulting from connection
interruptions due to batteries being empty or too old, or due to exceeding
the Bluetooth® transmission range.
Please also observe the relevant country-specific regulations before using
the product.
Adjuing the volume
High volume levels and long liening times can permanently damage your
hearing. Because in-ear headphones are placed directly in the ear canal,
they can become 6–9 dB louder than conventional headphones, and this
increases the risk of hearing damage.
► Before inseing the earphones, set the volume to minimum.
Only increase the volume aer inseing the earphones.
► Do not use the in-ear headphones at high volume for a long time. When
liening and speaking normally with in-ear headphones, your own voice
should ill be perceptible.
► In case of tinnitus, reduce the volume. If necessary, consult a doctor.
EN