20 System Configuration Commands
sets: NOM (number of open microphones)
n : (1 4)
>>>> This command sets how many active MUs
resp. open microphones are currently allowed.
n stands for the maximal number of open
microphones.
In order to be able to execute the limitation to
the number of active MUs specified with this
command, the function of the maximum
number of MUs must first be activated with
the command J 9 n.
sets: RF Mode
n : (0 = Auto / 1 = Manual, fix channel)
>>>> This command is used to set whether the RF
mode is set automatically depending on the
reception situation or whether a fixed channel
is selected.
sets: global NOM
n : (0 = use NOM in allocation /
1 = NOM globally disabled)
>>>> This command is used to activate the function
of limiting the active MUs.
sets: Speak/Allocation Mode
n : (0 = Toggle / 1 = Push To Talk /
3 = Voice Activation)
>>>> This command is used to set how the
microphone units can dial into the system.
sets: MU Button Power Off/Lock Power Key (LPK)
n : (0 = Deactivate / 1 = Activate)
>>>> This command is used to set whether the MUs
can be switched off via the MU button or not.
When the J command is called, this status is
displayed under LPKdisabled or LPKenabled.
sets: Priority Mode
m : see table in the following
>>>> This command is used to set which function is
assigned to the function key of the chairman
station. The assignment, which is referred to
as "Normal", is a normal clearing of all
microphone units that are active at this time.
The other so- called priority modes are listed in
the small table under m and explained in the
further course of the document.