Beyerdynamic QUINTA Series - Voting Commands; T4 Command - Enable Voting

60 Voting Commands
6 Voting Commands
The voting commands all refer to individual MUs, for example to switch on their voting
. Consequently, all MUs must be addressed directly.
This assumes that you know the listing of the MUs, since they are addressed under their
MU list positions and not via the MU ID.
Chapter 5 deals with reading the MU list and also shows how to deal with empty list
positions or unregistered MUs that are, however, in the RF range.
6.1 T4 command
Enable Voting Commands
Communication direction
Controller -> CU -> MU
Syntax
Description
T4 pp v
Enable voting for named MU
Parameters
Description
pp
Position in MU list (CU-internal)
[150 positions in range: 0x00 0x95]
v
1 = enable voting // 0 = disable voting