Beyerdynamic QUINTA Series - Audio Setup Commands - Digital Signal Processing; P Commands - DSP Addressing

80 Audio Setup Commands Digital Signal Processing
8 Audio Setup Commands Digital Signal Processing
This chapter covers relevant areas of audio signal processing that may occur in the
Quinta CU due to its functionality and connectivity.
In this context, memory must be regularly read out and rewritten. The term memory
register is therefore used very frequently in the following.
8.1 P commands DSP Addressing
Communication direction
Controller -> CU -> DSP
Syntax
Description
P r
DSP read
P r v
DSP write
Parameters
Description
r
DSP register to read from/write to
[range: 0x0F 0xFF]
v
Register value
[range: 0x00 0xFF]
Note
for a lot of further information.
The following chapter will only list three important DSP registers and show examples for
the handling of DSP addressing.