BGates LT - Mobile Phone and SMS Control; Activating BGates LT via SMS; Setting Personal Password via SMS

2. Setting the personal password
BGates LT has a default password that is 0000. We strongly recommend
you to change it with a new password and to keep it secret, writing it
down in a safe place. The password may contain only 4 numbers.
• Send an SMS using your mobile phone to the number active on
the SIM card inside the BGates LT device, using the following
formula (without spaces between words):
You will receive an SMS to conrm the changes.
WARNING: BGates LT must be reset to factory settings if you misplace
your password. All saved phone numbers will be deleted and messages and
settings will be restored to the initial values (including password to 0000).
MOBILE PHONE AND SMS USE
ACTIVATION OF BGates LT
1. Preliminary steps
• Add the number of the SIM that you will insert into the BGates LT
to your mobile phones contact list giving it a name that is easily
identied. For example Name: “Garage Door”, Phone Number:
“07936 719189”.
• Insert the SIM into slot (D) of your BGates LT.
• Make sure that your mobile phone sends its caller ID when
making a call. If your mobile phone does not send its Caller
ID check the phones “Settings/Phone” and make sure “Show
My Caller ID” is turned on. This instruction is correct for all
Apple iPhones.Almost all other mobile phones have a menu
option that allows you to turn the phones Caller ID ON and OFF.
If you are using a landline phone, contact your service provider and ask them
to enable your phones Caller ID. If your phone is connected to a PBX exchange,
contact the PBX administrator and ask him to enable your phones Caller ID.
oldpassword,P,newpassword
(example: 0000,P,1234)
12