It is also possible to enable gate opening with landline telephone numbers.
Complete list of functions
To change the features of BGates LT, send an SMS to BGates LT writing the “Command Text”
Function Command text via SMS Note
A1*
Smart Start ON
password,E,SMART=ON
ex. 1234,E,SMART=ON
Open to all calls
(factory default)
A2*
Smart Start OFF
password,E,SMART=OFF
ex. 1234,E,SMART=OFF
Open only to memorised numbers
Caution - Some functions are only available for devices with: *Firmware 2.1.2 and above / ** Firmware 2.2.4 and above.
To know the version of your device, use the “13” function.
14
To Next Page
Loading...