BGates LT - SMS Command Functions (Part 1); Change Password via SMS; Enabling New Mobile Phone; Multiple Phone Enabling

Function Command text via SMS Note
1
Change password
Default password: 0000
oldpassword,P,newpassword
ex. to change the default password (0000)
with a new one (1234) type: 0000,P,1234
A response SMS “Your password has
been changed” will be sent to you as
conrmation.
2
Enabling a new mobile phone to
open a gate
password,I,phonenumber
ex. 1234,I,347123456789
(phone number without international country code)
You will receive an SMS message
reading “phonenumber successfully
inserted” as conrmation of the process
2a**
Multiple enabling of mobile phones
for gate opening
password,MI,telephonenumber1,telephonenumber2,
telephonenumber3,…
Enabling command by simply sending
an SMS, up to 10 telephone numbers
3
Deleting a phone number enables
to open a gate
password,D,phonenumber
ex. 1234,D,347123456789
(phone number without international country code)
You will receive an SMS message
reading “phonenumber successfully
removed” as conrmation of the process
4
Check number
(of an enabled phone)
password,C,phonenumber
ex. 1234,C,347123456789
You will receive a response SMS
message on the status of the phone
number: “found in phonebook” if enabled;
“not found in phonebook” if not enabled
15