BGates LT - SMS Command Functions (Part 2)

Function Command text via SMS Note
5
Changing the response SMS text to
command 1 “Change Password”
password,E,T7,new text Default SMS:
“Your password has been changed”
(max 160 characters)
6
Activating a response SMS for
Enabling/Deleting
a mobile phone number
password,E,A1 This function is already factory
activated (default)
7
Deactivating a response SMS for
Enabling/Deleting a mobile phone
number
password,E,A0
8
Changing the response SMS text to
command 2 “Enabling an opening
phone number...”
password,E,T5,new text
ex.: 1234,E,T5,command executed
Default SMS:
“successfully inserted”
(max 160 characters)
9
Changing the response SMS text to
command 3 “Deleting an enabled
phone number...”
password,E,T6,new text
ex.: 1234,E,T6,command executed
Default SMS:
“successfully removed”
(max 160 characters)
16