SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 3249
17-piece Micro Air Grinder Kit
SPECIFICATION
Chuck Size: Ø 3 mm
Grinding Wheel: max. Ø 25 mm
Free Speed: 54000 rpm
Speed Control: 44500 rpm - 54000 rpm
Air Inlet: 1/4"
Air Consumption: 143 l/min
Max. Air Pressure: 90 psi (6.3 bar)
Noise Level: LpA 76 dB (A)
LwA 87 dB (A)
Vibration Level: ahd = 1,05 m/s
IMPORTANT SAFETY INFORMATION
WARNING!
Read and understand and follow all instructions and warnings before operating this tool.
Failure to do so may result in personal injury and/or property damage and will void warranty.
Oil the tool before each use. 4 to 5 drops of a good grade Air Tool Oil placed in the air inlet is
s
ufficient. Use proper air pressure and CFM rating listed for this tool.
- Make sure that the tool is in the OFF position when connecting to the compressed
air system.
- Wear always approved goggles, dust mask and hearing protectors when using this
air tool.
- Use only accessories that are designed for use with air tools.
- Make sure to disconnect tool from air supply before changing accessories,
performing service on tool, and when not in use.
- As with any tool, use common sense when operating.
- Do not wear loose clothing or jewelry that could become caught by moving parts,
causing injury.
- Operate the tool in a safe distance from yourself and others person in the work
area.
To Next Page
Loading...
Need help?
General
