EasyManua.ls Logo

BHBikes ATOM - Motor Maintenance; Storage; Prolonged Storage; Technical Specifications

BHBikes ATOM
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
USER MANUAL ATOM
48
Motor Maintenance
Because the motor is a precision machine, do not disassemble it or exert excessive force on it (e.g. do NOT hit
this product with a hammer).
Storage
Keep the bicycle in a place that is:
Flat and stable
Well ventilated and dry
Protected from the elements and direct sunlight
Prolonged Storage
If you are going to store the bicycle for a prolonged period (1 month or more), remove the battery and store
it as follows.
Make sure that the remaining battery capacity is above 50% and then store it indoors, in a cool
(10 to 20°C) and dry place.
Check the remaining battery capacity once a month, as the battery is slowly discharged while
in storage. If the capacity is below 50%, charge it until it is above 50%.
When using it again after a prolonged period of storage, be sure to charge the battery before use.
TECHNICAL SPECIFICATIONS
Motor
Direct Current Brose Motor.
250 W power.
Maximum assistance speed 25 km/h.
System voltage: 36 V.
Battery
Lithium-ion battery.
Battery voltage: 36 V.
Capacity: 500 Wh or 600 Wh (depending on version).
Central Display Panel
USB type: USB 2.0.
Output current; max. 1,000 mA.
FAQs
What is the maximum speed of this bicycle?
It depends on the user. There is no maximum speed. However, at speeds over 25 km/h, the pedal assistance
provided by the motor is disabled. This restriction on assistance is a legal requirement for pedal-assist bicycles,
according to European regulation EN 15194.

Table of Contents