English
12
79
12 STORAGE - DISPOSAL
12.1 Location Change
Should the machine be placed in a different location, it is
necessary to:
• disconnect the appliance from the supply network;
• carry out the general cleaning of the appliance as indicated
in chapter "Cleaning and Maintenance";
• put the parts back into place and close the doors;
• Lift and position the appliance in the assigned location.
12.2 Inactivity and Storage
If the appliance needs to be stored or remains inactive for
a long period, carry out the same operations as described
in section "Location Change", therefore:
• wrap the appliance with a cloth to protect it from dust
and humidity;
• make sure that the appliance is installed in a suitable place
(temperature must be lower than 1°C) and be careful not
to put cartons or appliances on it.
To Next Page
Loading...
