EasyManua.ls Logo

Biasi MULTIPOINT 14S - Gas Accident Prevention

Biasi MULTIPOINT 14S
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 16 -
USE
USER INSTRUCTIONS
Figure 4.1
1
2
3
4
5
1 Gas valve
2 Water volume knob
3 Water volume
4 Control valve
5 Drain valve
4.2 Gas accident prevention
Check if the burner is out after use and do not
forget to turn off the gas valve and power if the
burner fails to extinguish.
Always check the gas connectors for gas leak
-
age with leak detection fluids. If any gas leak-
age is detected, open the room windows and
doors. A
t that moment, do not ignite or oper-
ate the switch of electric appliances or plugs
because the flame or electr
ic spark can cause
an explosion.
Heaters must use the gas type which the heat
-
er is designed to use, different type of gas must
not be used.
If the flame goes unsteady, stop using the wa-
ter heater and contact your qualified gas safe
reg
istered installer or service engineer for re-
pair or adjustment.
Turn off gas after use.
Open the window in case you can
smell gas.
Don't touch electric switch.