en-12
en
2. . Installation
2.1 Safety instructions
w Installation activities may only be performed
by technical staff qualified for this purpose.
w Before starting installation: read the safety
instructions.
See also:
1.5 "Safety instructions" on page 10
2.2 Inspection on delivery
• Check the unit and the packaging to ensure they have been
delivered in good order. Notify the driver and the supplier
immediately if any shipping damage is detected.
• Ensure that all components are present. Notify supplier of
any missing parts immediately.
2.3 General working method
2.3.1 Sequence of operations
Biddle recommends working as follows when installing the
unit:
1. Hang the unit up.
2. For water-heated models:
connect the unit to the central heating system.
To Next Page
Loading...