SERVICE COMFORT AIR CURTAIN
en-40
en
6.2.2 Opening the unit
For fee-hanging and recessed models with electrical
heating (Types DF E-F, E-R) and models without heat-
ing (Types DF A-F, A-R):
1. Remove the front panel, if necessary.
2. Remove the inlet grille 4.
For cassette models (Type DF C):
1. Push the inlet grille’s left- and right-hand latches towards
each other. Use a screwdriver to do this.
2. Twist the inlet grille open and allow to hang freely.
3. Remove the inlet grille, if necessary, by opening the latches
on the other side.
To Next Page
Loading...